MITSUBISHI Output Expansion FX2N-16EYR

Description:

Output expansion block FX2N – 16EYR

Application sequencer:FX1N, FX3G, FX2N, FX3U, FX1NC, FX3GC, FX2NC, FX3UC FX2NC – CNV – IF is required for connection to FX1NC and FX2NC. To connect to FX3GC, FX3UC, FX2NC – CNV – IF or FX3UC – 1PS – 5V is required.

SPEK:

Rated voltage Internal power supply from the sequencer

Number of output points 16 points

Output connection shape Vertical terminal block (M3 screw)

Output type / format relay

External power supply AC 250 V DC 30 V or less

Maximum load Resistive load Total load current of 2A / 1 point common per resistance load should be as follows. · Output 4 points / common: 8 A or less · Output 8 points / common: 8 A or less

Maximum load Inductive load 80VA

Minimum load DC 5 V 2 mA (reference value)

Relative humidity 5 to 95% RH (noncondensing) · · · · in operation

Anti-vibration When DIN rail is installed Frequency: 10 to 57 Hz One amplitude: 0.035 mm X, Y, Z 10 times in each direction (80 minutes in total) The criteria are based on IEC 61131-2

Anti-vibration When DIN rail is installed Frequency: 57 to 150 Hz Acceleration: 4.9 m / s 2 Ten times in each of X, Y, Z directions (total of 80 minutes each) The criterion is based on IEC 61131-2

Anti-vibration Direct installation Frequency: 10 to 57 Hz One amplitude: 0.075 mm X, Y, Z 10 times in each direction (80 minutes in total) The criteria are based on IEC 61131-2

Anti-vibration Direct installation Frequency: 57 to 150 Hz Acceleration: 9.8 m / s 2 X, Y, Z 10 times in each direction (80 minutes in total) The criteria are based on IEC 61131-2

Impact resistance 147 m / s 2 , working time 11 ms, criterion for judgment three times in X, Y, Z directions by sine half-wave pulse is according to IEC 61131-2

Noise immunity Noise voltage with 1,000 Vp-p, noise width 1 µs, rising 1 ns, with noise sitor with period of 30 to 100 Hz